HSL 301

Cremone lock with deadbolt

Deadbolt lock with additional cremone locking for particularly secure custody areas. It has a re-codable HSL tumbler locking system. In the standard corridor side locking version, the locks have a mechanical locking status indicator on the key guide side.

Cremone lock for prison doors HSL 301
deadbolt
made of stainless steel
HSL key guide
for door thicknesses up to 200 mm
MECHANICAL BOLT POSITION INDICATOR
for lock status visualisation
Lever
for operating the espagnolette rods

Functional description

The HSL double-bit key is inserted into the lock.

The deadbolt is withdrawn with the key via a single tour (180° turn). The cremone bolts are retracted via a 45° turn of the lever upwards.

The door can be opened.

The door is being closed.

The cremone bolts are withdrawn downwards via a 45° turn of the lever. The bolt is pre-locked with the key via a single tour (180° turn).

The door is completely locked and secured.

Re-coding the lock

The locking mechanism can be re-coded to a different locking when it is unlocked (bolt retracted). This requires a key of the current locking and a key of the future locking.

Features

Deadbolt lock with additional cremone locking for particularly secure custody areas. It has a re-codable HSL tumbler locking system. In the standard corridor side locking version, the locks have a mechanical locking status indicator on the key guide side.

Application areas

The type HSL 301 is designed for detention room doors and specially secured detention areas. The additional cremone locking downwards and upwards secures the door on three sides.

Overview

  • designed for specially secured detention rooms
  • Cremone bolt deadlocked optionally without, in extended, in withdrawn main bolt state
  • easy operation with HSL double-bit key (1 turn)
  • Lock can be re-coded without tools
  • cremone rods are not included in the scope of delivery

Product locations

  • Custody door
  • Extra-secured detention door
Mobiler Select
Technical details
Options
Downloads
Accessories

Technical details

Dimensions: (LxWxH) 280 x 22 x 220 mm
Forend dimension: (LxWxH) 410 x 35 x 4 mm
Bolt throw: 20 mm
Cremone stroke: 16 mm
Bolt material: Stainless steel casting
Lock case material: Stainless steel
Finishing: matt
Weight: 5,4 kg
Locking system: HSL double-bit lever system
Levers: 7
mechanically re-codable: yes
mechanical bolt position indicator: yes, one-sided
max. side load bolt forces: 30 kN
max. end load bolt counterforce: 6 kN
Number of audited locking operations: 500,000
IP rating: IP65
Fire protection testing: AINSI
Break-in standard: according to DIN EN14256
Operating temperature: -40°C to +65°C
Storage temperature: -40°C to +65°C
Relative humidity: 95% non condensing

Options

The following equipment options are available for lock type HSL 301:

  • S1 | Main Locking Mechanism: Lockable on one side
  • S2 | Main Locking Mechanism: Lockable on both sides
  • DR | DIN direction: right hand
  • DL | DIN direction: left hand
  • DB | DIN direction: right and left
  • OA | Opening direction: outward
  • OE | Opening direction: inward
  • SK | Special forend: angular
  • SL | Special forend extra long: length 325 mm and width 35 mm
  • SM | Special forend medium wide: Width 40 mm
  • SE | Special forend extra wide: Width 50 mm
  • MK | Magnet in latch: front side
  • MS | Magnet in bolt: bar magnet from below
  • TO | Cremone bar blocking: without
  • TE | Cremone bar blocking: with bolt retracted
  • TA | Cremone bar blocking: with bolt pre-locked
  • AS | Removal barrier
  • PS | Production lock (dummy lock without tumbler lock mechanism)
  • RB | Bolt position indicator: on both sides
  • RC | Bolt position indicator: on both sides inverse
  • RI | Bolt position indicator: one-sided inverse

S1 | Main Locking Mechanism: Lockable on one side

The key guide of the main locking mechanism is located on one side of the lock. This equipment is used e.g. for detention room locks.

Configurable options

  • Lockable on one side
  • Lockable on both sides

S2 | Main Locking Mechanism: Lockable on both sides

The key guide of the main locking mechanism is located on both sides of the lock. This equipment is used e.g. for passage doors.

Configurable options

  • Lockable on one side
  • Lockable on both sides

DR | DIN direction: right hand

If the hinges are on the right side of the door, it is the "DIN right" door opening.

Configurable options

  • DIN direction: right
  • DIN direction: left

DL | DIN direction: left hand

If the hinges are on the left side of the door, it is the "DIN left" door opening.

Configurable options

  • DIN direction: right
  • DIN direction: left

DB | DIN direction: right and left

Bolt locks that close on both sides can be used for both DIN right and DIN left doors. A specification when ordering is not required here. This applies e.g. to lock types HSL 101 and HSL 301 with feature S2.

OA | Opening direction: outward

Required specification for one-sided closing locks with deadbolt latch or deadbolt and latch. This applies e.g. to lock types HSL 102 and 104 with feature S1.

OE | Opening direction: inward

Required specification for one-sided closing locks with deadbolt latch or deadbolt and latch. This applies e.g. to lock types HSL 102 and 104 with feature S1.

SK | Special forend: angular

The forend is square at both ends and not round.

Configurable options

  • Standard forend: round
  • Special forend: angular
  • Special forend: extra wide
  • Special forend: extra long

SL | Special forend extra long: length 325 mm and width 35 mm

The special forend is 45 mm longer and 5 mm wider than the standard version.

Configurable options

  • Standard forend: round
  • Special forend: angular
  • Special forend: extra wide
  • Special forend: extra long

SM | Special forend medium wide: Width 40 mm

The special forend is 10 mm wider than the standard version.

Configurable options

  • Standard forend: round
  • Special forend: angular
  • Special forend: extra wide
  • Special forend: extra long

SE | Special forend extra wide: Width 50 mm

The special forend is 20 mm wider than the standard version.

Configurable options

  • Standard forend: round
  • Special forend: angular
  • Special forend: extra wide
  • Special forend: extra long

MK | Magnet in latch: front side

With a reed contact (provided by the customer) in the frame, this feature enables the electronic evaluation of the locking status of the door (signal: bolt locked and door in frame). The two magnets are visible on the front side of the bolt.

Configurable options

  • Bolt without magnet
  • Bolt with bar magnet
  • Latchbolt with magnet

MS | Magnet in bolt: bar magnet from below

With a reed contact (provided by the customer) in the frame, this feature enables the electronic evaluation of the locking status of the door (signal: bolt locked and door in frame). The bar magnet is mounted from below in the bolt and is not visible.

Configurable options

  • Bolt without magnet
  • Bolt with bar magnet
  • Latchbolt with magnet

TO | Cremone bar blocking: without

The cremone bolt mechanism can be retracted and extended independently of the lock's locking status. The cremone bolt mechanism can always be moved freely via the lever.

Configurable options

  • Cremone bar blocking: without
  • Cremone bar blocking: with bolt retracted
  • Cremone bar blocking: with bolt pre-locked

TE | Cremone bar blocking: with bolt retracted

The cremone bolt mechanism cannot be moved when the bolt is retracted (open state). Sequence of operation: Close the door, close the bolt, extend the cremone bolt mechanism.

This option prevents:

  • Locking the door from the outside via the cremone bolt by unauthorised persons

Configurable options

  • Cremone bar blocking: without
  • Cremone bar blocking: with bolt retracted
  • Cremone bar blocking: with bolt pre-locked

TA | Cremone bar blocking: with bolt pre-locked

The cremone bolt cannot be moved when the bolt is pre-locked (locked state). Operating sequence: Close the door, extend the cremone bolt mechanism, pre-lock the bolt.

This option prevents:

  • Retracting the cremone bars from the outside by unauthorised persons

Configurable options

  • Cremone bar blocking: without
  • Cremone bar blocking: with bolt retracted
  • Cremone bar blocking: with bolt pre-locked

AS | Removal barrier

The removal barrier prevents unauthorised removal of the lock when the door is open. The lock can only be removed when the locking elements are locked. Ergo, the double-bit key is absolutely necessary.

PS | Production lock (dummy lock without tumbler lock mechanism)

Dummy lock available for door production without security features. The production lock will be charged. After a faultless return (inspection by STUV Prison Solutions), the amount minus shipping costs will be refunded or charged.

RB | Bolt position indicator: on both sides

For passage doors, different lock types can be equipped with bolt position indicators on both sides. In this case, the bolt position indicators are not on one axis, contrary to the key guides. Please observe the drawing. Tightening torque of the lock position indicators: Ma= 6 Nm

For locks used without bolt position indicator, there is no drilling in the door leaf.

Configurable options

  • Bolt position indicator one-sided
  • Bolt position indicator on both sides
  • Bolt position indicator one-sided inverse
  • Bolt position indicator on both sides inverse

RC | Bolt position indicator: on both sides inverse

For passage doors, various lock types can be equipped with a bolt position indicator on both sides. With the equipment option "inverse" the indicator is opposite to the standard, i.e. the indicator is retracted when the bolt is closed in front. With the "double-sided" equipment option, the bolt position indicators are not on one axis, contrary to the key guides. Please observe the drawing. Tightening torque of the locking position indicators: Ma= 6 Nm

For locks used without bolt position indicator, there is no drilling in the door leaf.

Configurable options

  • Bolt position indicator one-sided
  • Bolt position indicator on both sides
  • Bolt position indicator one-sided inverse
  • Bolt position indicator on both sides inverse

RI | Bolt position indicator: one-sided inverse

With the "inverse" equipment option, the indicator is in the opposite direction to the standard, i.e. when the bolt is closed, the indicator is retracted. Tightening torque of the locking status indicator: Ma= 6 Nm

For locks used without bolt position indicator, there is no drilling in the door leaf.

Configurable options

  • Bolt position indicator one-sided
  • Bolt position indicator on both sides
  • Bolt position indicator one-sided inverse
  • Bolt position indicator on both sides inverse

Downloads

miscellaneous

Technische Zeichnung HSL301S1

Do you have questions about a project?