SL 301

Cremone lock with deadbolt

Deadbolt lock with additional bar locking for specially secured patient doors. In the standard version, the lock has a mechanical bolt position indicator on the fitting side in the one-way closing version.

Functional description

The profile cylinder key is inserted into the profile cylinder.

The deadbolt is retracted with the key via a tour (360° turn). The shoot bolts are retracted upwards via a 45° turn of the lever.

The door can be opened.

The door is closed.

The shoot bolts are extended downwards via a 45° turn of the lever. The bolt is prelocked with the profile cylinder key via a tour (360° turn).

The door is completely locked and secured at three points.

Features

Application areas

The lock type SL 301 is designed for doors that need to be particularly secured. The additional bar locking to the bottom and top secures the door on three sides.

Overview

designed for specially secured detention rooms
cremone bolt deadlocked optionally without, in extended, in withdrawn main bolt state
simple operation, pre-equipped for Euro profile cylinder
cremone rods are not included

Product locations

Outer gate
Psychiatry patient door

Mobiler Select

Technical details

Options

Accessories

Technical details

Dimensions: (LxWxH)	280 x 22 x 220 mm
Forend dimension: (LxWxH)	410 x 35 x 4 mm
Bolt throw:	20 mm
Cremone stroke:	16 mm
Bolt material:	Stainless steel casting
Lock case material:	Stainless steel
Finishing:	matt
Weight:	5.3 kg
pre-equipped for:	Euro profile cylinders
mechanically re-codable:	no
mechanical bolt position indicator:	yes, one-sided
max. side load bolt forces:	30 kN
max. end load bolt counterforce:	6 kN
Number of audited locking operations:	500.000
IP rating:	IP65
Operating temperature:	-40°C to +65°C
Storage temperature:	-40°C to +65°C
Relative humidity:	95% non condensing

Options

The following equipment options are available for lock type SL 301:

DR | DIN direction: right hand
DL | DIN direction: left hand
DB | DIN direction: right and left
SK | Special forend: angular
MK | Magnet in latch: front side
TO | Cremone bar blocking: without
TE | Cremone bar blocking: with bolt retracted
TA | Cremone bar blocking: with bolt pre-locked
AS | Removal barrier
PS | Production lock (dummy lock without tumbler lock mechanism)
RI | Bolt position indicator: one-sided inverse

DR | DIN direction: right hand

If the hinges are on the right side of the door, it is the "DIN right" door opening.

Configurable options

DIN direction: right
DIN direction: left

DL | DIN direction: left hand

If the hinges are on the left side of the door, it is the "DIN left" door opening.

Configurable options

DIN direction: right
DIN direction: left

DB | DIN direction: right and left

Bolt locks that close on both sides can be used for both DIN right and DIN left doors. A specification when ordering is not required here. This applies e.g. to lock types HSL 101 and HSL 301 with feature S2.

SK | Special forend: angular

The forend is square at both ends and not round.

Configurable options

Standard forend: round
Special forend: angular
Special forend: extra wide
Special forend: extra long

MK | Magnet in latch: front side

With a reed contact (provided by the customer) in the frame, this feature enables the electronic evaluation of the locking status of the door (signal: bolt locked and door in frame). The two magnets are visible on the front side of the bolt.

Configurable options

Bolt without magnet
Bolt with bar magnet
Latchbolt with magnet

TO | Cremone bar blocking: without

The cremone bolt mechanism can be retracted and extended independently of the lock's locking status. The cremone bolt mechanism can always be moved freely via the lever.

Configurable options

Cremone bar blocking: without
Cremone bar blocking: with bolt retracted
Cremone bar blocking: with bolt pre-locked

TE | Cremone bar blocking: with bolt retracted

The cremone bolt mechanism cannot be moved when the bolt is retracted (open state). Sequence of operation: Close the door, close the bolt, extend the cremone bolt mechanism.

This option prevents:

Locking the door from the outside via the cremone bolt by unauthorised persons

Configurable options

Cremone bar blocking: without
Cremone bar blocking: with bolt retracted
Cremone bar blocking: with bolt pre-locked

TA | Cremone bar blocking: with bolt pre-locked

The cremone bolt cannot be moved when the bolt is pre-locked (locked state). Operating sequence: Close the door, extend the cremone bolt mechanism, pre-lock the bolt.

This option prevents:

Retracting the cremone bars from the outside by unauthorised persons

Configurable options

Cremone bar blocking: without
Cremone bar blocking: with bolt retracted
Cremone bar blocking: with bolt pre-locked

AS | Removal barrier

The removal barrier prevents unauthorised removal of the lock when the door is open. The lock can only be removed when the locking elements are locked. Ergo, the double-bit key is absolutely necessary.

PS | Production lock (dummy lock without tumbler lock mechanism)

Dummy lock available for door production without security features. The production lock will be charged. After a faultless return (inspection by STUV Prison Solutions), the amount minus shipping costs will be refunded or charged.

RI | Bolt position indicator: one-sided inverse

With the "inverse" equipment option, the indicator is in the opposite direction to the standard, i.e. when the bolt is closed, the indicator is retracted. Tightening torque of the locking status indicator: Ma= 6 Nm

For locks used without bolt position indicator, there is no drilling in the door leaf.

Configurable options