SL 201
Fallenriegel-Revisionsklappen-Schloss für Profilzylinder
Fallenriegelschloss für Revisionsklappen mit eintourigem Fallenriegelausschluss. In der Standardvariante hat das Schloss in der einseitig schließenden Version eine mechanische Riegelstellungsanzeige auf der Beschlagsseite.

Functional description
Der Profilzylinderschlüssel wird in den Profilzylinder eingeführt.
Der Fallenriegel wird mit dem Profilzylinderschlüssel über eine erste Tour (360°-Drehung) zurückgeschlossen. Die Revisionklappe kann geöffnet werden.
Der Schlüssel kann bei zurückgeschlossener und vorgeschlossener Falle abgezogen werden.
Bei vorgeschlossenem Fallenriegel ist sichergestellt, dass die Revisionsklappe im Notfall schnell zugeworfen werden kann. Durch die Hilfsfalle wird der Fallenriegel automatisch gesichert.
Features
Fallenriegelschloss für Revisionsklappen mit eintourigem Fallenriegelausschluss. In der Standardvariante hat das Schloss in der einseitig schließenden Version eine mechanische Riegelstellungsanzeige auf der Beschlagsseite.
Application areas
Der Typ SL 201 ist für Revisionsklappen in Patientenraumtüren konzipiert. Der Fallenriegel wird über eine Tour (360°-Schlüsseldrehung) vor- und zurückgeschlossen. Der Schlüssel kann im verschlossenen und unverschlossenen Zustand abgezogen werden.
Technical details
Maße: (LxBxH) | 200 x 22 x 220 mm |
Stulpmaß: (LxBxH) | 280 x 30 x 4 mm |
Fallenriegelauschluss: | 20 mm |
Material Fallenriegel: | Edelstahl Feinguss |
Material Schlossgehäuse: | Edelstahl |
Oberfläche: | matt |
Gewicht: | 2,3 kg |
vorgerüstet für: | Euro Profilhalbzylinder |
mechanische Riegelstellungsanzeige: | ja, einseitig |
max. vertikale Riegelbelastbarkeit: | 3000N |
max. Riegelgegendruck: | 600N |
Anzahl geprüfter Schließvorgänge: | 500.000 |
Umweltschutzklasse: | IP65 |
Betriebstemperatur: | -40°C bis +65°C |
Lagertemperatur: | -40°C bis +65°C |
relative Luftfeuchtigkeit: | 95% nicht kondensierend |
Options
Für den Schlosstyp SL 201 stehen folgende Ausstattungsoptionen zur Verfügung:
- DB | DIN direction: right and left
- SK | Special forend: angular
- MF | Magnet in latchbolt: lateral
- AS | Removal barrier
- PS | Production lock (dummy lock without tumbler lock mechanism)
DB | DIN direction: right and left
Bolt locks that close on both sides can be used for both DIN right and DIN left doors. A specification when ordering is not required here. This applies e.g. to lock types HSL 101 and HSL 301 with feature S2.
SK | Special forend: angular
The forend is square at both ends and not round.
Configurable options
- Standard forend: round
- Special forend: angular
- Special forend: extra wide
- Special forend: extra long
MF | Magnet in latchbolt: lateral
With a reed contact (provided by the customer) in the frame, this feature enables electronic evaluation of the door's locking status (signal: latch bolt locked and door in frame). The magnets are mounted laterally in the latch and are visible. For this application, we recommend a functional test of the frames in conjunction with an on-site reed contact.
Configurable options
- Bolt without magnet
- Bolt with bar magnet
- Latchbolt with magnet
AS | Removal barrier
The removal barrier prevents unauthorised removal of the lock when the door is open. The lock can only be removed when the locking elements are locked. Ergo, the double-bit key is absolutely necessary.
PS | Production lock (dummy lock without tumbler lock mechanism)
Dummy lock available for door production without security features. The production lock will be charged. After a faultless return (inspection by STUV Prison Solutions), the amount minus shipping costs will be refunded or charged.