HSL 205

Food Hatch Bolt Lock

The HSL 205 lock is equipped with a bolt. It has a re-codable HSL tumbler locking system. In the standard corridor side locking version, the locks have a mechanical locking status indication on the key guide side.

Deadbolt

with sliding coating

HSL key guide

for door thicknesses up to 200 mm

mECHANICAL BOLT POSITION INDICATOR

for lock status visualisation

Functional description

The HSL double-bit key is inserted into the lock.

The bolt is withdrawn with the key via a single tour (180° turn). The food hatch can be opened.

The hatch is closed.

When the hatch is closed, the bolt is pre-locked again via a single tour (180° turn). The key is removed.

The hatch is completely locked.

Re-coding the lock

The locking mechanism can be re-coded to a different locking when it is unlocked (bolt retracted). This requires a key of the current locking and a key of the future locking.

Features

Application areas

The type HSL 205 is intended for inspection flaps and food hatches in detention room doors. The bolt is withdrawn via a single tour (180° key turn). The key can be removed in locked and unlocked state.

Overview

designed for inspection flaps and food hatches
Operation with HSL double-bit key
Lock re-codable without tools

Product locations

Food Hatch

Mobiler Select

Technical details

Options

Downloads

Accessories

Technical details

Dimensions: (LxWxH)	200 x 22 x 220 mm
Forend dimension: (LxWxH)	280 x 30 x 4 mm
Bolt throw:	20 mm
Bolt material:	Stainless steel casting
Lock case material:	Stainless steel
Finishing:	matt
Weight:	2,3 kg
Locking system:	HSL double-bit lever system
Levers:	7
mechanically re-codable:	yes
mechanical bolt position indicator:	yes, one-sided
max. side load forces:	10 kN
max. end load bolt counterforce:	2,5 kN
Number of audited locking operations:	500,000
IP rating:	IP65
Operating temperature:	-40°C to +65°C
Storage temperature:	-40°C to +65°C
Relative humidity:	95% non condensing

Options

Für den Schlosstyp HSL 205 stehen folgende Ausstattungsoptionen zur Verfügung:

S1 | Main Locking Mechanism: Lockable on one side
DB | DIN direction: right and left
MK | Magnet in latch: front side
AS | Removal barrier
PS | Production lock (dummy lock without tumbler lock mechanism)

S1 | Main Locking Mechanism: Lockable on one side

The key guide of the main locking mechanism is located on one side of the lock. This equipment is used e.g. for detention room locks.

Configurable options

Lockable on one side
Lockable on both sides

DB | DIN direction: right and left

Bolt locks that close on both sides can be used for both DIN right and DIN left doors. A specification when ordering is not required here. This applies e.g. to lock types HSL 101 and HSL 301 with feature S2.

MK | Magnet in latch: front side

With a reed contact (provided by the customer) in the frame, this feature enables the electronic evaluation of the locking status of the door (signal: bolt locked and door in frame). The two magnets are visible on the front side of the bolt.

Configurable options

Bolt without magnet
Bolt with bar magnet
Latchbolt with magnet

AS | Removal barrier

The removal barrier prevents unauthorised removal of the lock when the door is open. The lock can only be removed when the locking elements are locked. Ergo, the double-bit key is absolutely necessary.

PS | Production lock (dummy lock without tumbler lock mechanism)

Dummy lock available for door production without security features. The production lock will be charged. After a faultless return (inspection by STUV Prison Solutions), the amount minus shipping costs will be refunded or charged.